Ke Jie Pcb offers an efficient and competitive ONE STOP PCB SERVICE.
We value our client’s time and efficiency. That’s why we have studied and prepared a solution that will go above the simple production of the circuit.
Starting from the fabrication of your pcb, the SMT with components of your choice, testing, packaging and finally the shipping.
This is our All in one PCB solution.
Headache free.
If you need a complete PCB service, One Stop PCB package is our best choice.
Try it now. Contact us today.
Fill in the quote request. You will receive a response within less than 24 hours.
1) We require extra components for assembly attrition as follows:
- Discrete SMT passives:
- 0201size: 20% extra, subject to a minimum of 100 extra.
- 0402 size: 20% extra, subject to a minimum of 70 extra.
- 0603 size: 10% extra, subject to a minimum of 50 extra.
- 0805 size: 10% extra, subject to a minimum of 20 extra.
- 1206 or larger size: 10% extra, subject to a minimum of 10 extra.
- Active Devices:
- 10% extra for devices costing < $1.00 ea, subject to a minimum of 1 extra.
- 5% extra for devices costing between $1.00 to $5.00 each, subject to a minimum of 1 extra.
- 1% extra for devices costing > $5.00 each, subject to a minimum of 1 extra.
- Thru-Hole devices:
- 5% extra for devices costing up to $5.00 each, subject to a minimum of 1 extra.
- 1% extra for devices costing > $5.00 each, subject to a minimum of 1 extra.
- Hardware items (screws, nuts, washers, etc):
- 5% extra, subject to a minimum of 5 extra.
2) Insufficient attrition would be construed as parts shortage.
3) All SMT components must be in reels / continuous tapes (minimum 6” long) / tubes / or trays.
4) All Through-hole (DIP) ICs must be supplied in trays or tubes or tapes.
5) All consigned parts must be shipped to us in a properly kitted form (each line item of BOM in a separate bag, properly marked for identifying the component unambiguously).
6) Kits for multiple jobs must be in SEPARATE BAGS identified by appropriate assembly order number.
Short Run Low – Mid volume project
Turnkey PCB Assembly
In our continuous strive to deliver 100% working boards, you’ll have the option to send us the components to be mounted or we can source them for you.
